|
|
 Dakota
Products |
 |
|
|
|
|
| |
|
|
|
Ultrasonic
Instruments from Dakota |
|
|
|
|
 |
|
Take your
MX-3 underwater with the UMX
underwater enclosure. This custom designed housing provides a
convenient method for off-shore inspections. The UMX / MX-3
combination is designed to inspect for corrosion in a variety of
off-shore applications: Ships, pipes, storage vessels, docks,
pilings, and piers. |
UMX Series PDF Brochure |
 |
 |
|
The MVX is
equipped with multiple viewing options to provide users with a
complete set inspection tools: (RF waveform, +/- Rectified
waveform, Time based B-Scan, and Large Digits). |
| |
|
|
 |
|
The MX-1 is our most basic
model. This gauge can be pre-programmed for a specific material
type using a simple PC program. The MX-1 is an excellent choice
for users that measure the same material type all the time, and
do not have the need to re-calibrate to different materials on
the fly. Note: The material velocity must be known prior to
programming. |
|
MX Series PDF Brochure |
|
|
 |
|
|
The MAX,
Ultrasonic Stress Meter, measures the actual clamp load
produced by tightening a threaded fastener. The MAX can
measure this load, or the resulting fastener elongation,
very accurately in fasteners of virtually any material from
1/2 inch to 20 feet in length. The measurement is achieved
by determining the change in the transit time, of an
ultrasonic shock wave along the length of the fastener as
the fastener is tightened by any method.. |
| |
| |
|
|
|
 |
|
|
The PX series are packaged in an
aluminum extruded body, with
nickel plated aluminum end caps. The PX series gauges are
typically used for thin material applications. This gauge
has the ability to calibrate to a variety of different
materials using a one point calibration option. |
|
PX Series PDF Brochure |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
