Products Overview

World Class NDT Products From Russell NDE Systems:

  • New Ferroscope EMI instrument for ferrous and non-ferrous tube inspection (fast EC pull speeds)
  • New Bracelet Probes for detection of internal pitting on bare pipe and and Corrosion under Insulation up to 4" thick (CUI) on pipes of any diameter over 4".
  • Flexible Boiler Tube Probes to inspect tubes with maximum sensitivity passing through bends easily.
  • Flexible and rigid heat exchanger probes with single or dual exciter coils, compatible with all competitor's instruments
  • New Removable head eddy current probes, compatible with most ECT instruments
  • New CIRC E-PIT probe to detect carburization in furnace tubes
  • Calibration standards for H/E and Boiler tubes/pipes
  • SATURN (mag-bias) probes for fin-fan tube inspection
  • TT Probes for detection of exfoliation in S/S super-heater tube pendants
  • E-PIT, CIRC-E-PIT and I-PIT probes for inspection of pipes and boiler tubes from outside and inside 
  • VertiScan: Robotic crawler for boiler tube inspection
  • UT Pen Gauge: A1207 the smallest, most convenient thickness gauge on the market
  • Surface array probes for pipe scanning for SCC
  • Curved surface array probes
  • Internal RFT and ECT array probes
BRACELET PROBE

BRACELET PROBE

Russell offers two styles of Bracelet Probe: Bracelet Probe for CUI detection for insulated pipe and Bracelet Probe for H2S damage detection on bare pipe Both have a scan width of 10" and can detect smaller local wall loss than PEC probes.

View PDF
VERTISCAN ROBOT

VERTISCAN ROBOT

The VertiScan can inspect up to five tubes of a boiler water wall at one time. Defects detectable range from erosion to internal and external wall loss due to corrosion

View PDF
ULTRASONIC PEN THICKNESS GAUGE

ULTRASONIC PEN THICKNESS GAUGE

The world's smallest thickness gauge. Keep it in your shirt pocket or the dashboard of your vehicle. Very simple and rugged, with long battery life and replaceable, built-in single or dual transducer. Works where other thickness gauges can't get readings, for instance on internally corroded pipes

View PDF
Collapsible Boiler Probe

Collapsible Boiler Probe

Our collapsible, flexible boiler probe is designed to be able to pass through a swaged boiler tube and to expand inside the larger tube, past the swage, to provide exceptional resolution to local erosion and pitting defects. The probe is flexible to go around typical boiler tube bends.

View PDF
ULTRASONIC FLAW DETECTORS

ULTRASONIC FLAW DETECTORS

We represent Sonotron NDE Instruments who manufacture a line of ultrasonic instruments with top quality and features. Sonotron distinguishes itself from the crowd by making the user interface both friendly and efficient. Custom software modules are available for welds, nozzles and many more.

View PDF
UT POD

UT POD

The UT POD is the world's smallest ultrasonic flaw detector. It can be held, or strapped to the sleeve for the ultimate in portability. Long battery life and rugged construction make this flaw detector a must-have for those doing rope access or confined space inspections. Priced right too!

View PDF
PHASED ARRAY INSTRUMENTS

PHASED ARRAY INSTRUMENTS

Sonotron's line of ultrasonic phased array flaw detectors are second to none! The sector scan can be displayed in a multi-skip mode where the operator can visualize exactly where the reflections are coming from. Sonotron's intuitive software interface make the instrument easy to set-up and use.

View PDF
Carburization detection probe

Carburization detection probe

Carburization of furnace tubes can be detected and sized with our new CIRC E-PIT probe. The probe fits the Ferroscope 308 and is contoured to fit the furnace tube size. Both internal and external carburization can be detected.

View PDF
THICKNESS GAUGE

THICKNESS GAUGE

Dakota's line of ultrasonic flaw detectors and thickness gauges are great for portability, ruggedness and reliability. The MVX displays the A-Scan as well as the thickness of the part in user-choice black-on white or other sun-readable displays.

View PDF
FLAWTECH TEST KITS

FLAWTECH TEST KITS

Flawtech test kits contain real defects in welds, plates, tubes etc. They can be used as test pieces for NDT certification exams, or for proving the sensitivity of a technique such as radiography, MPI/LPI, UT or Eddy Current. Custom flaws can be introduced into welds to client specifications.

View PDF
EDDY-CURRENT SYSTEMS

EDDY-CURRENT SYSTEMS

Technofour has many years of experience in design-build of shop-installed wire and rod testers. For rod, tube, wire; this on-line tester with flaw alarm/marker, ensures excellent product quality to meet the demands of your customers.

View PDF
RFT and ECT array probes

RFT and ECT array probes

Our legendary RFT and ECT probes are now available in array styles with up to 32 coil-channels per probe.

View PDF
Ferroscope EMI

Ferroscope EMI

The new (2023) Ferroscope EMI performs RFT and ECT, NFT and MFL, Saturation, flexible and rigid probes for heat exchanger and boiler tube inspection. Up to 16 coil channels at 4 frequencies (ECT). Surface and internal arrays. Battery or wall power.

View PDF